From coLinux

....even on the reccomended way

This: gateway="eth0/192.168.37.0"

is simply wrong, as well as

1. There should be no gateway="..." setting.
2. The default file may contain one near the bottom.

iface_eth0="192.168.37.20 netmask 255.255.255.0 broadcast 192.168.37.255" iface_eth1="dhcp"

which doest sticks well to the graph above and uses dhcp as a way of showing the right setting...If dhcp was working, nonone would have read this wiki.

---

HOWTOs are suppose to be helpful. This guide just confuses people because it doesn't direct the user in a sequential manner but modulizes the problem. If people new exactly what the problem was they wouldn't be reading this anyway. They would just google for the solution.

---

pcap-bridge option be careful with ipv6/DAD=(Duplicate Address Detection), it checks duplicated ipv6 and ipv4 IP's when ipv6 is install in the kernel

You should use not an inused IP on coLinux side for the network Winpcap. This type of network adds a "virtual" network card in your real network. So, the main error is the duplicated address self, not the DAD. -- HenryNe

---

This guide really needs to be broken down a bit, with some little complete howtos in separate pages -it is a bit too monolithic. Also the old XML config file stuff should be switched for the new style. The old stuff is in the history for someone still using a previous version of colinux. -- Dannystaple